TCIG Technical Information Notes
The following are Technical Information Notes (TIN) 001 to 052 produced by TCIG-led Working Groups and can be downloaded below: For easy referencing and downloading, TINs are listed in batches of 10.
TINs 001 - 010
- 001 - Access to Tower Cranes After Commissioning
- 002 - Raising and Lowering of Small Material
- 003 - Tower Crane Access Procedures
- 004 - Installing Wire Ropes on Winch Drums and Storage Reels
- 005 - Housekeeping on Tower Cranes
- 006 - Tower Crane Access Ladders
- 007 - Duty Boards
- 008 - Tower Crane Edge Protection
- 009 - Security of Access to the Crane Base
- 010 - Tower Crane Anti-Collision Systems
TCIG 001
Access to Tower Cranes After Commissioning
TCIG 002
Raising and Lowering of Small Material
TCIG 003
Tower Crane Access Procedures
TCIG 004
Installing Wire Ropes on Winch Drums and Storage Reels
TCIG 005
Housekeeping on Tower Cranes
TCIG 006
Tower Crane Access Ladders
TCIG 007
Duty Boards
TCIG 008
Tower Crane Edge Protection
TCIG 009
Security of Access to the Crane Base
TCIG 010
Tower Crane Anti-Collision Systems
TINs 011 - 020
- 011 - Attachment of Floodlights, Illuminated Signs and Christmas Decorations
- 012 - Tower Crane Access Signage
- 013 - Rescue of Personnel From Height on Tower Cranes (withdrawn - see link below)
- 014 - Pre-Erection Component Checks
- 015 - Risk Assessment – General Access to Tower Cranes (including for maintenance)
- 015 - Risk Assessment – General Access to Tower Cranes (including for maintenance)
- 016 - Fall Protection Equipment For Tower Crane Operators (withdrawn - see link below)
- 017 - Radio Communication for Lifting Operations
- 018 - Tower Crane Life
- 019 - Contract Lifting and Crane Hire When Erecting, Dismantling and Using Tower Cranes on Construction Sites
- 020 - The Effect of Wind on Tower Cranes In Service
TCIG TIN 011
Attachment of Floodlights, Illuminated Signs and Christmas Decorations
TCIG TIN 012
Tower Crane Access Signage
TCIG TIN 013 has now been replaced and has been converted into a Good Practice Guide, TCIG 2101: Emergency Action Planning & Rescue From Height on Tower Cranes; and can be downloaded from: https://www.cpa.uk.net/safety-and-technical-publications/tower-crane-guidance
TCIG TIN 014
Pre-Erection Component Checks
TCIG TIN 015
Risk Assessment – General Access to Tower Cranes (including for maintenance)
TCIG TIN 016 - Now withdrawn as content replaced by TCIG 2101 publication -Emergency Action Planning & Rescue From Height on Tower Cranes and can be downloaded from:https://www.cpa.uk.net/safety-and-technical-publications/tower-crane-guidance
TCIG TIN 017
Radio Communication for Lifting Operations
TCIG TIN 018
Tower Crane Life
TCIG TIN 019
Contract Lifting and Crane Hire When Erecting, Dismantling and Using Tower Cranes on Construction Sites
TCIG TIN 020
The Effect of Wind on Tower Cranes In Service
TINs 021 - 030
- 021 - Maintenance Principles for Tower Cranes
- 022 - The Use of Tag Lines with Tower Cranes
- 023 - Luffing Jib Tower Cranes - Information and Actions for Owners/Suppliers
- 024 - Luffing Jib Tower Cranes - Precautions For Users
- 025 - Luffing Jib Tower Cranes - Precautions for Operators Working at or near Minimum Radius in Strong Winds
- 026 - Lifting Loads Using Fabric Bags
- 027 - Tower Crane Out-of-Service Wind Speeds
- 028 - Lifting of Mechanical Plant on Drip Trays
- 029 - Repair and Reprogramming of Inverters
- 030 - Tower Crane Erection Team Composition
TCIG TIN 021
Maintenance Principles for Tower Cranes
TCIG TIN 022
The Use of Tag Lines with Tower Cranes
TCIG TIN 023
Luffing Jib Tower Cranes - Information and Actions for Owners/Suppliers
TCIG TIN 024
Luffing Jib Tower Cranes - Precautions For Users
TCIG TIN 025
Luffing Jib Tower Cranes - Precautions for Operators Working at or near Minimum Radius in Strong Winds
TCIG TIN 026
Lifting Loads Using Fabric Bags
TCIG TIN 027
Tower Crane Out-of-Service Wind Speeds
TCIG TIN 028
Lifting of Mechanical Plant on Drip Trays
TCIG TIN 029
Repair and Reprogramming of Inverters
TCIG TIN 030
Tower Crane Erection Team Composition
TINs 031 - 040
- 031 - Managing the design, construction and inspection of tower crane bases, grillages, and ties
- 032 - Exclusion Zones
- 033 - Stability of Tower Crane Jibs During Erection
- 034 - Ensuring the Safe Access of Tower Crane Operators on Site
- 035 - Specification and Verification of Replacement Components for Tower Cranes
- 036 - Tower Crane Electrical Supplies, Earthing Arrangements and Lightning Protection
- 037 - Minimising the Effects of Winch Failure During Load Testing
- 038 - Leaving Tower Cranes Out-of-Service
- 039 - Being updated - see https://www.cpa.uk.net/special-interest-groups/tower-crane-interest-group
- 040 - Lifting of Persons with Tower Cranes
TCIG TIN 031
Managing the design, construction and inspection of tower crane bases, grillages, and ties
TCIG TIN 032
Exclusion Zones
TCIG TIN 033
Stability of Tower Crane Jibs During Erection
TCIG TIN 034
Ensuring the Safe Access of Tower Crane Operators on Site
TCIG TIN 035
Specification and Verification of Replacement Components for Tower Cranes
TCIG TIN 036
Tower Crane Electrical Supplies
TCIG TIN 037
Minimising the Effects of Winch Failure During Load Testing
TCIG TIN 038
Leaving Tower Cranes Out-of-Service
TCIG TIN 040
Lifting of Persons with Tower Cranes
TINs 041 - 050
- 041 - Travelling Tower Cranes on Rail Tracks
- 042 - Selection of Tower Cranes - Anticipated Utilization
- 043 - Design and Design Checking of Attachment Brackets for Tower Crane Accessories
- 044 - User Responsibilities for the Maintenance, Inspection and Thorough Examination
- 045 - Load Testing of Tower Cranes
- 046 - Lifting Inside the Load Curve of Luffing Jib Tower Cranes
- 047 - Tower Crane Related Fire Hazards
- 048 - The Use of High Tensile Fasteners on Tower Cranes
- 049 - Lifting of Pre-slung Loads
- 050 - Prevention of Objects Falling from Height
TCIG TIN 041
Travelling Tower Cranes on Rail Tracks
TCIG TIN 042
Selection of Tower Cranes - Anticipated Utilization
TCIG TIN 043
Design and Design Checking of Attachment Brackets for Tower Crane Accessories
TCIG TIN 052
Lifting of Intermediate Bulk Containers (IBCs)
TCIG TIN 044
User Responsibilities for the Maintenance, Inspection and Thorough Examination
TCIG TIN 045
Load Testing of Tower Cranes
TCIG TIN 046
Lifting Inside the Load Curve of Luffing Jib Tower Cranes
TCIG TIN 047
Tower Crane Related Fire Hazards
TCIG TIN 048
The Use of High Tensile Fasteners on Tower Cranes
TCIG TIN 049
Lifting of Pre-slung Loads
TCIG TIN 050
Prevention of Objects Falling from Height
TINs 051 - 054
- 051 - Thorough Examination of Self-erecting Tower Cranes
- 052 - Lifting of Intermediate Bulk Containers (IBCs)
- 053 - Lifting of Loads with Integral Lift Points
- 054 - Installation of Camera Systems on Tower Cranes
TCIG TIN 051
Thorough Examination of Self-erecting Tower Cranes
TCIG TIN 052
Lifting of Intermediate Bulk Containers (IBCs)
TCIG TIN 053
Lifting of Loads with Integral Lift Points
TCIG TIN 054
Installation of Camera Systems on Tower Cranes